Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information DEM-0005

Condition




The differential electronic module (DEM) checks if the signal from the control valve is within the permitted limits by comparing the signal with a calculated value.
Diagnostic trouble code (DTC) ECM-0005 is stored if the control module receives a signal from the control valve corresponding to a current higher than 4095 mA. The control module interprets this as a fault.
Diagnostic trouble code (DTC) DEM 0005 can be diagnosed with the engine running and the engine speed (RPM) >500 rpm.

Substitute value
- Four wheel drive is blocked.

Possible source
- Defective control module.

Fault symptom[s]
- Four wheel drive is not functioning.