Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CEM-1A26

Condition
The central electronic module (CEM) checks the output signal to the relay coil for the 15i power supply relay.
Diagnostic trouble code (DTC) CEM-1A26 is stored if the central electronic module (CEM) registers that the output signal to the relay coil is too high.
Diagnostic trouble code (DTC) CEM-1A26 can be detected when activating the relay.

Substitute value
- None.

Possible source
- Short-circuit to supply voltage in the relay circuit
- Defective relay.

Fault symptom[s]
- General warning lamp lit.