BCM-A032

BCM A032 Stability Function (Too long stability control)

Condition
Diagnostic Trouble Code (DTC) BCM-0145 is stored if the Brake Control Module (BCM) registers that the stability function operates for more than 15 seconds non-stop. Diagnostic Trouble Code (DTC) BCM-A032 is stored in the following operating cycle (ignition off and ignition on).

Substitute value
- None.

Possible Source
- Diagnostic Trouble Code (DTC) BCM-0145 has been stored in the previous operating cycle.

Fault symptom[s]
- None.