BCM-0111

BCM 0111 Communication between Control Module (AYC Stabilization takes too long)

Condition





Note: The Diagnostic Trouble Code (DTC) applies only to cars with Dynamic Stability And Traction Control (DSTC).

Diagnostic Trouble Code (DTC) BCM-0111 is stored if the Brake Control Module (BCM) registers that the wheel or steering wheel alignment is incorrect.

Substitute value
- Traction control is blocked
- Stability control is blocked
- Active yaw control is blocked.

Hint: For information about abbreviations, see Brake system abbreviations.

Possible Source
- Incorrect wheel alignment
- Incorrect steering wheel alignment
- Defective steering wheel angle sensor.

Fault symptom[s]
- The anti-spin warning lamp is lit (up to and including 2002 model year)
- General yellow warning lamp lit (from model year 2003 inclusive)
- Anti-spin does not function
- The stability control system does not function
- The traction control system does not function.