Programming the Infotainment Control Module (ICM)

Programming the infotainment control module (ICM)

Programming the infotainment control module (ICM)
Two customer parameters can be programmed in the infotainment control module (ICM).
- Programming the infra-red communication setting
- Setting the view in the display.
Select the desired alternative:
1. Continue programming
2. Exit.

Select the desired alternative.

1 - Programming the infra-red communication setting

2 - DONE

-------------------------------------------------

Programming the infra-red communication setting




- Ignition on.
The setting for infra-red communication can be changed.
In cars without a navigation system, the infra-red communication setting must be set at Not possible to minimize the risk of disturbances from other components.
Click the VCT2000 symbol to read off the present setting. To change the setting, select the required value in the list and program.
Select the desired alternative:
1. Continue programming
2. Exit.





Select the desired alternative.

1 - Setting the view in the display

2 - DONE

-------------------------------------------------

Setting the view in the display




- Ignition on.
The view in the display can be set.
Click the VCT2000 symbol to read off the present setting. To change the setting, select the required value in the list and program.
The Normal status is the default setting. A twilight sensor then regulates the view in the display. During the day the display has a light background, while at night it has a dark background.
- Normal
- Positive - Always light background
- Negative - Always dark background.






Continue - DONE

-------------------------------------------------