Lighting, Internal Front

Lighting, Inner

Lighting, internal front

NOTE: As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the essential information in the illustrations is always correct.

Preparatory work

Ignition off
Ignition off





Removal

Removing cover





Remove the cover, use a bone knife.

Removing the interior lighting

Remove:





- 1 screw
- interior lighting, pull down
- microphone (vehicle with telephone)
- the connectors.

Installation

Installing the interior lighting

Install:





- the connectors
- microphone (vehicle with telephone)

NOTE: The arrow on the microphone must point towards the driver's seat.

- the interior lighting
- the screw.

Installing cover
Fit the cover.