Programming and Relearning

Programming the remote control setting

Programming the remote control setting
Cars equipped with seats and door mirrors with memory automatically set the stored positions for seats and mirrors, depending on which remote control unlocks the car.
The memory for the seat and memory for door mirror functions can be deactivated. If the function is deactivated, the seat position or door mirror position is not set when the car is unlocked with the remote control. The memory positions for the seat and door mirrors are then set using the memory buttons on the seat control panel
Follow the instructions below to change the setting for how seat and door mirrors should work when using the remote control.




- Ignition on
- Click the VCT2000 symbol to read off the setting.
Change the setting by marking the desired alternative and programming. Check that the read off value is changed to the desired alternative


Continue - DONE

-------------------------------------------------