Intermittent Fault - I

Intermittent Fault







Check the cable between control module terminal #34 and terminal #2 on the 6-pin transmission connector. Check for an intermittent short-circuit to supply voltage according to Checking wiring and terminals. Intermittent faults.

Remedy as necessary.

Other information:
- To connect the breakout box, see Connecting the breakout box
- To disconnect the transmission connectors, see Transmission connectors
- For information about signals, see Signal description. Transmission control module (TCM).

Select Continue when the fault has been remedied.

Continue with Next Procedure. Fault-Tracing Information - Intermittent Fault