Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information PSM-0036

Condition




Motor 4 controls the height of the front edge of the seat.
Motor 4 must be activated before the diagnostic trouble code (DTC) can be detected.
The diagnostic trouble code (DTC) is stored if motor 4 does not run despite the control for M4+ being activated and the power seat module (PSM) registering +12 V on the M4+ signal cable.

Possible source
- Open-circuit in signal cable M4+
- Blown fuse.

Fault symptom[s]
- Height adjustment of the seat not functioning.