Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-405C

Condition




The information about the fuel level in the fuel tank is used for calculation when detecting leakage at leak diagnosis.
The diagnostic trouble code (DTC) is stored in the engine control module (ECM) if the engine control module (ECM) detects an electrical fault in the fuel level sensor, and leakage in the fuel tank system (minor leak or major leak) after leak diagnostics.

Substitute value
None.

Possible source
- Fault trace the central electronic module (CEM).

Fault symptom[s]
- Gauges/Fuel level not accurate/Value too low