Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CEM-6C07

Condition




The central electronic module (CEM) checks activation of the lock motors in the doors. The control module receives an indication of the status of the lock motors (locked/unlocked).
If the central electronic module (CEM) does not receive an indication that the lock motor in the left-hand rear door could be locked at the first attempt, the central electronic module (CEM) transmits a second lock command. If there is still no indication after this attempt, the diagnostic trouble code (DTC) is stored.

Substitute value
- None.

Possible source
- Defective switch for indication of the lock motor status
- The lock motor is stuck in the unlocked position
- The lock motor has become too hot.

Fault symptom[s]
- Does not lock / unlock a door
- Door locked/unlocked twice in succession