CEM-3F02 (A)

Diagnostic trouble code (DTC) information CEM-3F02 (A)

Condition




The central electronic module (CEM) checks the signal from the position sensor at the clutch pedal.
The diagnostic trouble code (DTC) is stored if the control module registers a faulty signal.
The diagnostic trouble code (DTC) can be diagnosed with the ignition in positions I or II.

Substitute value
- Cruise control switched off.

Possible source
- Open-circuit in the signal cable
- Incorrectly installed pedal position sensor
- Damaged pedal position sensor.

Fault symptom[s]
- Cruise control does not function at all.