Over heated

Over heated

Replacing the component
The audio module (AUD) has registered an internal fault.
If the fault is intermittent it means that it has been registered previously but is no longer present. Intermittent faults can occur for a number of different reasons. The fault is evaluated depending on how it occurs. If the fault recurs, replace the audio module (AUD).
In the event of a permanent fault, replace the audio module (AUD).
Remedy as necessary.

Other information
- Audio module (AUD), replace Audio Module (AUD), Replace Audio module (AUD), replace Audio Module (AUD), Replace






Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information

Attempt New Test - Replacing the component

Fault Found - DONE

-------------------------------------------------