Checking Damper (MCC/Standard)

Checking damper (MCC/STANDARD)

Checking damper, linkage and related parts to climate unit
Check that the climate control temperature selector knobs, control cables and linkages to the damper are intact and operating correctly.
Check that the climate unit temperature damper is intact and operating correctly.
Remedy if necessary.

Other information:
- To access control cables and linkages, refer to Replacing or adjusting control cables / mechanical rear section and control panel / front section (Manual climate control / STANDARD) Service and Repair.
- To access the climate unit temperature damper, refer to Replacing damper motors Removal and Replacement.





Were any faults found?

Yes - FAULT FOUND

No - No Fault Found

-------------------------------------------------