Signal Too High. Intermittent Fault

Signal too high. Intermittent fault

Checking components and wiring
The engine control module (ECM) has previously registered a fault in the cruise control lever, but detects that the fault no longer exists.

Other information
- To access or replace the cruise control lever, see Replacing cruise control lever/turn signal indicator switch Replacing Cruise Control Lever/Turn Signal Indicator Switch
- For information about signals, see Signal specification Signal Specifications
- Checking wiring and terminals Checking Wiring and Terminals






Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
If the fault is intermittent, do not verify fault-tracing if the fault does not recur.
It is possible to view the information again, or leave fault-tracing for this diagnostic trouble code (DTC).

Do you want to view the information again?

Yes - Attempt New Test

No - FAULT FOUND

------------------------

Attempt New Test - Checking components and wiring

FAULT FOUND - DONE

-------------------------------------------------