Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-6A00

Condition




Diagnostic Trouble Code (DTC) ECM-6A00 is stored if the engine control module (ECM) registers a fault on the control signal cable for interlock (start inhibitor for manual transmission cars) between the engine control module (ECM) and the VGLA control module.

Substitute value
None.

Possible source

Signal too high:
- Short-circuit to supply voltage in the signal cable.

Signal too low:
- Short-circuit to ground in the signal cable.

Signal missing:
- Contact resistance or oxidation in the terminals
- Open-circuit in the signal cable.

Fault symptom[s]
- The engine does not start.