Activated Too Long

Activated too long

Eject button
The MD module (MP1) has registered that the eject button has been pressed for more than 3 minutes.
If the fault is intermittent, it has been registered previously but is no longer present. Intermittent faults can be caused by interference at start up of the minidisc player or can be another type of fault which occurs on different occasions. The fault is evaluated depending on how it occurs. If the fault recurs, replace the MD module (MP1).
For permanent faults, manually check that the eject button has not stuck in the pressed in position.
Remedy as necessary.

Continue - FAULT FOUND

-------------------------------------------------