Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ICM-E010

Condition




The infotainment control module (ICM) checks the power supply.
Diagnostic trouble code (DTC) ICM-E010 is stored if the control module registers that the power supply is more than 3 V below the supply to the central electronic module (CEM).
Diagnostic trouble codes (DTCs) can be detected with the ignition in positions I or II.

Substitute value
- None.

Possible source
- Open-circuit or short-circuit to ground in the power supply to the Infotainment Control Module (ICM)
- Contact resistance, oxidation or loose connections in the power supply to the control module
- Relay, infotainment defective.

Fault symptom[s]
- Audio unit not working
- The display does not light
- Functions in the infotainment system are not working
- No or reduced carphone functionality.