Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information AUD-000B

Condition
Diagnostic trouble code (DTC) AUD-000B is stored if the audio module (AUD) registers that the signal on the signal cable from the front loudspeaker is too high or too low.
Diagnostic trouble code (DTC) AUD-000B can be diagnosed when the ignition is on.

Hint: The signal cable to one or both of the front loudspeakers may be faulty.

Substitute value
- None.

Possible source
- Short-circuit to supply voltage in the signal cables between the front loudspeakers and the control module
- Short-circuit to ground in the signal cables between the front loudspeakers and the control module.

Fault symptom[s]
- No sound from the loudspeakers.