Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information AUD-000A

Condition
Diagnostic trouble code (DTC) AUD-000A is stored if the audio module (AUD) registers that the signal on the signal cable from the loudspeaker in the right rear door is too high or too low.
Diagnostic trouble code (DTC) AUD-000A can be diagnosed when the ignition is on.

Substitute value
- None.

Possible source
- Short-circuit to supply voltage in the signal cable between the control module and the loudspeaker in the right rear door
- Short-circuit to ground in the signal cable between the control module and the loudspeaker in the right rear door.

Fault symptom[s]
- No sound from the loudspeakers.