Internal Fault

Internal fault

Replacing the component
The audio module (AUD) has registered an internal fault.
If the fault is intermittent, it has been registered previously but is no longer present.
In the event of a permanent fault, replace the audio module (AUD). See Audio module (AUD), replacing Audio Module (AUD), Replacing.
Remedy as necessary.





Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
In case of this defect, troubleshooting is not followed by verification.
The information can be displayed again or the fault-tracing for this fault can be interrupted.

Do you want to view the information again?

Yes - Attempt New Test

No - Exit Fault-Tracing

------------------------

Attempt New Test - Replacing the component

-------------------------------------------------