Self-Adjustment of Damper Motor End Stops

Self-adjustment of damper motor end stops

Self-adjustment of damper motor end stops




Limit positions for damper motor self-adjustment

Choice of climate control
1. Electronic climate control (ECC)
2. Manual climate control (MCC) / Standard (STD).

Select the type of climate control.

1 - Limit positions for damper motor self-adjustment

2 - Limit positions for damper motor self-adjustment

------------------------

Limit positions for damper motor self-adjustment

Hint: After replacing the control module or shutter motors, and when a shutter motor or link has been removed, carry out self adjustment to define the shutter motor limit positions.




- Ignition off
- Reinstall the connectors, components etc.
- Ignition on.
Activate the self-adjustment. Wait at least 30 seconds.
Ignition off for at least 1 minute.
Start the engine.





Select Continue

Continue - DONE

------------------------

Limit positions for damper motor self-adjustment

Hint: After replacing the control module or shutter motors, and when a shutter motor or link has been removed, carry out self adjustment to define the shutter motor limit positions.




- Ignition off
- Reinstall the connectors, components etc.
- Ignition on.
Activate the self-adjustment. Wait at least 30 seconds.
Ignition off for at least 1 minute.
Start the engine.





Select Continue

Continue - DONE

------------------------

DONE - DONE

-------------------------------------------------