Incorrect Combination. Permanent Fault

Incorrect combination. Permanent fault

Replacing the switch unit
Replace the switch unit due to internal fault.

Additional information:
- To replace switch unit, see Keypad unit, steering wheel, replacing Keypad Unit, Steering Wheel, Replacing.

Press Continue when fault has been repaired.

Continue - Verification

-------------------------------------------------

Verification




Verification

Verification

Hint: After the repair it is necessary to check that the fault has been rectified.








- Ignition off.
- Connect connectors, install components, etc.
- Ignition on.
Check that the relevant functions of the switch units work.





Do buttons work?

Yes - VERIFIED

No - VERIFICATION FAILED

------------------------

VERIFIED - Fault Found

VERIFICATION FAILED - Trouble-shooting information

-------------------------------------------------

Trouble-shooting information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - FAULT-TRACING FAILED

No - Attempt New Test

------------------------

FAULT-TRACING FAILED - No Fault Found

Attempt New Test - Replacing the switch unit

-------------------------------------------------