Invalid Combination. Permanent Fault

Invalid combination. Permanent fault

Checking the turn signal lamp switch
Replace the turn signal lamp switch because an internal fault has been found.

Other information:
- To replace the turn signal lamp switch, see Turn signal switch, replacing Turn Signal Switch, Replacing.



Continue - Verification

-------------------------------------------------

Verification




Verification

Verification

Hint: After the repair it is necessary to check that the fault has been rectified.




- Ignition off.
- Connect the connectors, install the components, etc.
- Ignition on.
Check that all indicator switch functions work.





Does switch work?

Yes - VERIFIED

No - VERIFICATION FAILED

------------------------

VERIFIED - Fault Found

VERIFICATION FAILED - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - FAULT-TRACING FAILED

No - Attempt New Test

------------------------

FAULT-TRACING FAILED - No Fault Found

Attempt New Test - Checking the turn signal lamp switch

-------------------------------------------------