Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition




Motor 2 controls backrest rake. Motor 2 must be activated before the diagnostic trouble code (DTC) can be detected. Diagnostic trouble code (DTC) PSM-0002 is stored if no Hall sensor pulse is detected when motor 2 is activated and in operation.

Possible source
- Defective Hall sensor in motor 2.
- Short-circuit to supply voltage or ground in the signal cable.
- Open-circuit in the signal cable to the Hall sensor.

Fault symptom[s]
- Automatic seat control does not function (automatic control of other motors functioning as normal).