Internal Fault

Internal fault

Checking for permanent or intermittent faults




- Ignition on.
Press the power window switch 2 steps up to check the function of the automatic power window mechanism.

Is the automatic power window mechanism functioning?

Yes - Intermittent fault

No - Initiation

-------------------------------------------------

Initiation




The control module has registered an internal fault.
The window position must be initialized.
Ignition on.
Move the window to its upper limit position using manual control.
Initialize the window.
From model year 2003 inclusive, the window will lower approximately 10 centimeters and then close again during initialization.






Continue - Fault Found

-------------------------------------------------

Intermittent fault
Fault-tracing indicates that the control module had previously identified an intermittent fault, but that the fault is no longer present.


Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
If the fault is intermittent, do not verify fault-tracing if the fault does not recur.
It is possible to view the information again, or leave fault-tracing for this diagnostic trouble code (DTC).

Do you want to view the information again?

Yes - Attempt New Test

No - Fault Found

------------------------

Attempt New Test - Checking for permanent or intermittent faults

FAULT FOUND - Fault Found

-------------------------------------------------