Checking the Component

Checking The Component







Check that there is voltage via the fuse for the stop lamp switch.

Check the signal cable between the brake light switch terminal #2 and engine control module (ECM) #B26. Check between engine control module (ECM) terminal #A38 and the throttle unit terminal #2. Check for a short-circuit to ground.

Check for an open-circuit. Check for a short-circuit to supply voltage.
Remedy as necessary.

Other information:
- To fault-trace and check wiring and terminals, see Checking wiring and terminals

Was a fault detected?

YES: Refer to Trouble Code Descriptions. Diagnostic Trouble Code Descriptions
NO: Continue with Test.