Faulty Signal - Intermittent Fault

Faulty signal. Intermittent fault

Checking components and wiring
The immobilizer function is integrated in the central electronic module (CEM).
The engine control module (ECM) has previously registered a fault in the communication between the immobilizer and the engine control module (ECM), but has detected that this fault is no longer active.

Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
If the fault is intermittent, do not verify fault-tracing if the fault does not recur.
It is possible to view the information again, or leave fault-tracing for this diagnostic trouble code (DTC).

Do you want to view the information again?

Yes - Attempt New Test

No - Fault Found

------------------------

Attempt New Test - Checking components and wiring

FAULT FOUND - DONE

-------------------------------------------------