Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition




Diagnostic trouble code (DTC) ECM-5000 is stored if the engine control module (ECM) registers a fault in the signal cable from the air conditioning (A/C) pressure sensor.
Diagnostic trouble code (DTC) ECM-5000 is stored when the air conditioning (A/C) pressure is too low and it is registered by the engine control module (ECM) as a fault.

Substitute value
none

Possible source

Signal too high:
- short-circuit to supply voltage in the signal cable
- open-circuit in power supply
- open-circuit in ground lead
- defective air conditioning (A/C) pressure sensor

Signal too low:
- short-circuit to ground in the signal cable
- open-circuit in signal cable
- contact resistance in connectors
- defective air conditioning (A/C) pressure sensor

Signal missing:
- defective air conditioning (A/C) pressure sensor
- low pressure in the air conditioning (A/C) system
- leakage in the air conditioning (A/C) system

Fault symptom[s]
- Air conditioning (A/C) system does not work