Signal Too Low. Intermittent Fault

Signal too low. Intermittent fault

Checking the wires
Check the wire between central electronic module (CEM) 4D and steering wheel module (SWM) 21 (3/130).
Trouble-shoot for an intermittent short circuit to ground as described in Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults.
Do the necessary corrective action.

Additional information
- To connect the test box, see Connecting the breakout box Connecting the Breakout Box, Central Electronic Module (CEM).
- For information on signals, see Signal specification Pinout Values and Diagnostic Parameters.










Continue - DONE

-------------------------------------------------