Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition
Diagnostic trouble code (DTC) CEM-8E01 is stored if the control module registers a low signal from the back-up (reversing) lamp switch when gears 1 to 5 are engaged and vehicle speed exceeds 50 km/h.

Substitute value
- None.

Possible source
- Defective back-up (reversing) lamp switch.
- Short-circuit to ground in the cable from the back-up (reversing) lamp switch.

Fault symptom[s]
- The back-up (reversing) lamp is constantly lit.