REM-8F11

Condition

The rear electronic module checks the signal from the Xenon lamp position sensor.

Diagnostic trouble code (DTC) REM-8F11 is stored in the rear electrical module if the rear electrical module registers too high a signal from the Xenon lamp position sensor.

Diagnostic trouble code (DTC) REM-8F11 can be detected at ignition on.

Substitute value

- None.

Possible source

- Short-circuit to ground in the signal cable.
- Open-circuit in the signal cable.
- The position sensor for the Xenon lamp is incorrectly installed.

Fault symptom[s]

- The road surface is not illuminated.