REM-6A03

Condition

The rear electronic module checks the output signal to the relay coil for relay 2/158.

Diagnostic trouble code (DTC) REM-6A03 is stored if the rear electrical module registers that the output signal to the relay coil is missing or too low.

Diagnostic trouble code (DTC) REM-6A03 can be diagnosed when relay 2/158 is not activated.

Substitute value

- None.

Possible source

- Oxidation on the relay base switches.
- The relay is loose or missing.
- Defective relay.

Fault symptom[s]

- Does not lock / unlock a door.
- Does not lock / unlock the fuel tank filler cap.
- Does not lock or unlock the trunk lid.