REM-1A03

Condition

The rear electronic module (REM) checks the output signal to the relay coil for relay, extended power supply.

Diagnostic trouble code (DTC) REM-1A03 is stored if the rear electronic module (REM) registers that the output signal to the relay coil is too low or missing.

Diagnostic trouble code (DTC) REM-1A03 can be detected when the relay driver is not activated.

Substitute value

- None.

Possible source

- Relay missing.
- Defective relay.
- Contact resistance in the relay base.

Fault symptom[s]

- The tailgate wiper does not return to the start position.