DDM/PDM-0025

Condition
Diagnostic trouble code (DTC) DDM/PDM-0025 is stored if the control module registers that the signal cable for one of the power door mirror motors or defroster is interrupted at the same time that the relevant function is activated.

Substitute value
- None.

Possible source
- Open-circuit in the signal cable to the door mirror heating or motors (including the motor for electric folding door mirrors) Blown fuse 11C/35 or 11C/36.

Fault symptom[s]
- Power door mirror control does not function
- Misting on the windows and/or door mirrors.