DDM/PDM-0010

Condition
Diagnostic trouble code (DTC) DDM/PDM-0010 is stored if the control module registers a short-circuit to ground or an open-circuit in signal cable M1.
Diagnostic trouble code (DTC) DDM/PDM-0010 can be diagnosed when the central locking locks or unlocks.

Substitute value
- None.

Possible source
- Signal cable M1 is short-circuited to ground
- Open-circuit in signal cable M1.

Fault symptom[s]
- The central locking system does not function at all.

Condition
Diagnostic trouble code (DTC) DDM/PDM-0010 is stored if the control module registers a short-circuit to ground in signal cable M1.
Diagnostic trouble code (DTC) DDM/PDM-0010 can be diagnosed when the central locking locks or unlocks.

Substitute value
- None.

Possible source
- Signal cable M1 is short-circuited to ground.

Fault symptom[s]
- The central locking system does not function at all.