CCM-0010

Condition







Diagnostic trouble code (DTC) CCM-0010 is stored if the control module registers too low a signal from the air distribution damper motor. Diagnostic trouble code (DTC) CCM-0010 can only be detected for the climate control module (CCM) in MCC/STD version.

Substitute value

- None.

Possible source

- Short-circuit to supply voltage in the signal cable between the control module and the damper motor.
- Open-circuit in the signal cable between the control module and the damper motor.
- Contact resistance, oxidation or loose connections in the connectors.
- Defective damper motor.

Fault symptom[s]

- Air flow problem.