CEM-8F19

Condition

The central electronic module checks the signal from the right Xenon lamp.

Diagnostic trouble code (DTC) CEM-8F19 is stored in the central electronic module if the central electronic module registers a fault in the actuator motor for the right xenon lamp.

Diagnostic trouble code (DTC) CEM-8F19 can be detected with the ignition on and switching between low and high beam.

Substitute value

- None.

Possible source

- The actuator motor in the xenon lamp housing has jammed.
- Defective actuator motor in the xenon lamp housing.

Fault symptom[s]

- The low beam is constantly lit.
- The high beam is constantly lit.
- The road surface is not illuminated.