BCM-0095

BCM-0095: Communications Between Control Module, Communication Problems With Active On Demand Coupling
Condition

Note! The Diagnostic Trouble Code (DTC) applies only to cars with All-Wheel Drive (AWD) and Dynamic Stability And Traction Control (DSTC).

The control module for four wheel drive (Active on Demand Coupling) indicates to the Brake Control Module (BCM) when four wheel drive is activated. During four wheel drive the Brake Control Module (BCM) must not activate the stability function due to the risk of disrupting the control module for four wheel drive. Diagnostic Trouble Code (DTC) BCM-0095 is stored if the Brake Control Module (BCM) registers that the difference in speed between the front and rear wheels is too great.
The Diagnostic Trouble Code (DTC) can be diagnosed when the ignition is switched on.

Substitute value
- Stability control is blocked
- Active yaw control is blocked.

Hint: For information about abbreviations, Refer to Description and Operation.

Possible source
- Internal fault in the control module for the four wheel drive.

Fault symptom[s]
- The anti-spin warning lamp is lit (up to and including 2002 model year)
- General yellow warning lamp lit (from model year 2003 inclusive)
- Anti-spin does not function
- The stability control system does not function.