Canister Purge Solenoid: Service and Repair

Replacing the shut-off valve for the carbon filter container

Removing the shut-off valve
Remove the carbon filter container according to Replacing the carbon filter container.
Disconnect the connector, clamps and hoses from the EVAP canister shut-off valve.
Remove the EVAP canister shut-off valve.

Installing the shut-off valve
Install the clamps and hoses on the shut-off valve. Check that the hoses are correctly positioned and are not twisted or kinked.
Connect the connector. Press the quick-release connector together until a clicking sound is heard. Install the carbon filter container according to Replacing the carbon filter container.