Traction Control Module: Testing and Inspection

Signal Specification, ABS/DSTC (Dynamic Stability And Traction Control) Control Module
All the values given are between the relevant terminal in column 1 and terminals #A15 or #A46 (ground), unless otherwise indicated in brackets.

NOTE: It is important that the breakout box is connected and that the ground terminals have been checked before readings are taken.

U = DC voltage in volts (V)
U(bat) = battery voltage (V)
I = current in amperes (A)
U(low) = voltage approximately 0 V
f = Frequency in Hertz (Hz)

#A1 - #A3:

#A4 - #A9:

#A10 - #A13:

#A14 - #A22:

#A23 - #A32:

#A33 - #A37:

#A38 - #A42:

#A43 - #A47: