Procedures

Replacing Lambda Probes

Removal







- Jack up the car.
- Remove the LH front wheel.
- Uncover the wiring.
- Disconnect the connectors.
- Jack up the car.







- Uncover the wiring.
- Remove lambda probes using tool 999 5543.

Installation







- Install lambda probes using tool 999 5543. Tighten to 45 Nm. (33.2 ft lb).
- Secure wiring.
- Lower the car slightly.
- Connect the connectors.
- Secure wiring.
- Install LH front wheel. Tighten to 110 Nm (81 ft lb).

Lower the car.