Checking Power Supply To The Display

Checking power supply to the display

Checking power supply
Check that the battery charges normally when the motor is running/generator (GEN) charging.
Check display connector for contact resistance and oxidation according to Checking wiring and terminals. Permanent fault Checking Wiring and Terminals. Permanent Fault.
Check the cables between the display #11 and #12 and fuses 15 and 30 for an open-circuit according to Checking wiring and terminals. Permanent fault Checking Wiring and Terminals. Permanent Fault.
Remedy as necessary.

Other information:
- To access/replace the display, see Replacing the display Replacing the Display.













Were any faults found?

Yes - FAULT FOUND

No - No Fault Found

-------------------------------------------------