Replacing the Outer Steering Arm

Replacing the outer steering arm

Special tools:
951 2050 BEVEL PROTRACTOR 951 2050 Bevel Protractor

Removal and Installation

Note! For tightening torques, see: Tightening torque [1][2]Mechanical Specifications.

Removing the steering arm





Remove:
- the wheel
- the steering arm from the spindle.
Remove the lock nut. Remove the steering arm.

Installing the steering arm





Install:
- the steering arm
- the steering arm on the wheel spindle. Use new lock nut. Use counterhold and tighten. See: Tightening torque [1][2]Mechanical Specifications
Use: 951 2050 BEVEL PROTRACTOR 951 2050 Bevel Protractor
- the wheel. See: Installing wheels Service and Repair
- Align the wheels. See: Wheel alignment, checking / adjusting Wheel Alignment, Checking/Adjusting.