Checking the Switch, Climate Control Module (CCM)

Checking the switch, climate control module (CCM)

Activating and reading off the switch




- Ignition on.
Check the switches on the climate control module (CCM) as follows:
- Activate reading off the switch status
- Hold the relevant switch pressed in and check that the status changes.
Click the VCT2000 symbol to read off activating the switches.





Are the switches OK?

Yes - No Fault Found

No - Replacing the component

-------------------------------------------------

Replacing the component
The fault has probably occurred as a result of a defective switch. For switches located in the lower part of the dashboard environment panel, continue fault-tracing by replacing the switch to determine whether the fault is in the switch or the control module. Other switches are fixed to the climate control module (CCM) and cannot be replaced separately.

Other information:
- To access or replace the climate control module (CCM), see Climate control module (CCM), replacing Service and Repair.


Continue - Fault Found

-------------------------------------------------