Signal Faulty. Permanent Fault

Signal faulty. Permanent fault

Replacing the component
Replace fuel gauge sensor (left side) as described in Left fuel gauge sensor Left Fuel Gauge Sensor.


Continue - Verification

-------------------------------------------------

Verification




Verification

Verification

Hint: After the repair it is necessary to check that the fault has been rectified.








- Ignition off.
- Install the components, connect the connectors, etc.
- Make sure there are more than two litres of fuel in the left tank half.
- Ignition on.
Read the fuel level in the left tank half.





Is the value normal?

Yes - VERIFIED

No - VERIFICATION FAILED

------------------------

VERIFIED - Fault Found

VERIFICATION FAILED - Trouble-shooting information

-------------------------------------------------

Trouble-shooting information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - FAULT-TRACING FAILED

No - Attempt New Test

------------------------

Attempt New Test - Replacing the component

FAULT-TRACING FAILED - No Fault Found

-------------------------------------------------