Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition




Motor 3 controls the height of the rear edge of the seat. Motor 3 must be activated before the diagnostic trouble code (DTC) can be detected. Diagnostic trouble code (DTC) PSM-0034 is stored if motor 3 does not run despite M3+ being activated and the power seat module registering +12 V on the M3+ signal cable.

Possible source
- Open-circuit in signal cable M3+.
- Blown fuse (11C/4).

Fault symptom[s]
- The height of the rear edge of the seat cannot be adjusted.