Faulty Signal - Intermittent Fault

Faulty signal. Intermittent fault

Checking component and wiring
The engine fan control module has previously registered that the fan blade was blocked or that the temperature in the engine fan control module was too high, but the fault is no longer present.
Check that nothing is loose in the vicinity of the engine cooling fan (FC) which can temporarily stop the fan blade.





Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
If the fault is intermittent, do not verify fault-tracing if the fault does not recur.
It is possible to view the information again, or leave fault-tracing for this diagnostic trouble code (DTC).

Do you want to view the information again?

Yes - Attempt New Test

No - Fault Found

------------------------

Attempt New Test - Checking component and wiring

FAULT FOUND - DONE

-------------------------------------------------