FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.

Diagnostic Trouble Code (DTC) Information






Diagnostic trouble code information

Condition
If the central electronic module (CEM) detects a high signal from the lock position sensor 15 seconds after locking, diagnostic trouble code CEM-6A01 is displayed.

Possible source
- The lock has stuck in unlocked position
- Open circuit in lock position sensor signal wire
- Lock position sensor signal wire short circuited to voltage supply
- Relay fault
- Open circuit on relay supply/defective fuse
- Fault in locking motor circuit
- Fault in rear electronic module (REM).

Fault symptom[s]
- A door does not lock / open.