Faulty installation. Permanent Fault

Faulty installation. Permanent fault

Downloading new software
The radio unit software does not correspond when the 10CD changer is installed.
Down load the software for the 10CD changer. The software can be ordered from the replacement parts catalogue.

Other information:
- For information about programming the head unit / audio control module, see Radio/telephone, changing Removal and Replacement.



Continue - Verification

-------------------------------------------------

Verification




Verification

Verification

Hint: After carrying out the repair, check that the fault has been remedied.








- Ignition off.
- Reinstall connectors, components etc.
- Ignition on.
Check that CD changer functions.

Does the CD changer function?

Yes - VERIFIED

No - VERIFICATION FAILED

------------------------

VERIFIED - Fault Found

VERIFICATION FAILED - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - FAULT-TRACING FAILED

No - Attempt New Test

------------------------

FAULT-TRACING FAILED - FAULT-TRACING FAILED

Attempt New Test - Downloading new software

-------------------------------------------------